Configure Safecom Go Lexmark; Import The Safecom Security Template - Lexmark X642E - X642E Administrator's Manual

2 SafeCom Go Lexmark
4. On the Solutions tab click Install.
5. Browse to the Solution Install File (*.fls).
6. Click Start Install.
7. Check SafeCom Go and click Start.
8. Open the Configuration web page (2.4.2) and specify the SafeCom server
(2.5.2).
9. Open the Register web page (2.4.4) and register the device with the
SafeCom solution.
Resend configuration
If your Lexmark device is not configured correctly, or if the device must be
reconfigured to a different server, then resend the configuration details
(Server address and Group name) to the device.
1. Browse to Devices in the SafeCom Administrator.
2. Right-click the device and click Resend configuration.
The configuration details are now sent to the device and the configuration is
successful when the message "Server is reconfigured" appears.
2.3

Configure SafeCom Go Lexmark

To configure SafeCom Go Lexmark 012xxx software, proceed to 2.3.4.
To configure all other versions of SafeCom Go Lexmark, proceed to 2.3.1.
2.3.1

Import the SafeCom security template

1. Open a web browser and enter the IP address of the printer in the address
field. Use of JavaScript (Active Scripting) must be enabled.
2. Click Settings in the menu.
3. In the Other Settings list click Import/Export.
4. In the Import/Export Security Setups menu select Import Security
Setups File.
D60711-14 11