Table of Contents
Advertisement
Digital Image Stabilization
(DIS)
Available modes: TAPE-CAMERA, DUAL-
CAMERA
The digital image stabilization (DIS) function is
factory preset to on to stabilize the image by
electronically compensating for relatively minor
image shaking that is often annoying in close-
up shots.
Notes:
• The DIS function cannot compensate for
excessive image shaking.
• The DIS function does not work in CARD-
CAMERA mode.
Turning Off the DIS Function
When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn off
the DIS function. The picture will appear more
natural when the DIS function is off.
1
In TAPE-CAMERA or DUAL-CAMERA
mode, display the menu screen (see
page 31).
2
Touch [K] or [L] to select "Q", and
then touch [SET]. Touch [K] or [L] to
select "DIS", and then touch [SET].
DIS indicator
AU T O
MANU A L S E T
P I C . E F F E C T
D I S
ON
R E T URN
O F F
S E T
RE -
TURN
3
Touch [K] or [L] to select "OFF", and
then touch [SET].
D I S
4
Touch [RETURN] until the menu screen
turns off.
• The
indicator is turned off.
To return to DIS mode
Select "ON" and then touch [SET] in step 3
above.
OF F
34
E
Advertisement
Table of Contents
