Using The Mode Screens - Sharp ViewCam Slim VL-ME100E Operation Manual

Using the Mode Screens

You can use the mode screens to select
various functions. Follow the procedure below
to display the mode screen with the on-screen
button for the desired function.
1
Open the LCD monitor and adjust the
angle (see page 21).
2
Set the camcorder to the desired
camcorder mode (see page 28).
• In TAPE-VCR mode, the mode screen
appears after the POWER switch is set
to VCR. Proceed to step 4.
3
Touch any point on the LCD screen to
display the mode screen.
• In CARD-VCR mode, first display a still
image in full-screen (see page 92), and
then touch any point on the LCD screen
to display the mode screen.
1 / 2
F AD E
GAMMA
E F F .
QU I CK
R T RN
Example
AU T O
D I SP
AU T O AU T O
3 0min 3 0 min 6 0min 6 0min
4
Touch the page indicator until the
desired mode screen appears.
Page indicator
F AD E
GAMMA
E F F .
2 / 2
SRC H
MENU
5
Touch the desired on-screen button.
• Refer to each page for details on
operations.
To turn off the mode screens
Touch [DISP].
1 / 2
F AD E
GAMMA
E F F .
Notes:
• The on-screen button indicators are displayed in
yellow when the corresponding functions are
selected. These button indicators are displayed
in gray when the corresponding functions cannot
be selected.
• The example screens in this operation manual
are for explanation purposes, and may differ
slightly from the actual screen displays.
Example
1 / 2
D I SP
D I SP
AU T O
3 0 min
Example
D I SP
AU T O
30
E