Table of Contents
Advertisement
Preparation
Inserting and Removing a
Card
This camcorder accepts an SD Memory Card
(commercially available) or a MultiMediaCard
(supplied) for storage of still images.
Inserting a Card
1
Make sure that the POWER switch is set
to OFF.
2
Hold the camcorder as shown in the
figure, and slide the card slot cover
release in the direction of the arrow.
• The card slot cover is opened.
3
Insert a card into the slot with the label
facing upwards and the chipped corner
facing the lens, and then push it in as far
as it will go.
4
Close the card slot cover.
15
E
Card slot cover
release
Chipped
corner
Label
Removing a Card
1
Perform steps 1 and 2 of "Inserting a
Card".
2
Push the centre of the card edge in to
release the card.
3
Pull the card straight out.
Notes:
• The supplied MultiMediaCard is preformatted for
immediate use.
• See pages 108 and 109 for detailed information
on the use of MultiMediaCards and SD Memory
Cards.
Caution:
• Do not remove the card from the camcorder
while data is being recorded on the card (the O
indicator flashes on the screen), as this may
result in deletion of images on the card or
damage to the card itself.
Advertisement
Table of Contents
