Table of Contents
Advertisement
Basic Operations
Basic Operations
Playback
Playback
Tape Playback
Available mode: TAPE-VCR
The LCD monitor screen functions as a handy
playback monitor. Nothing needs to be
connected, allowing instant on-screen play-
back with the sound through the built-in
speaker.
Media Selection switch
POWER switch
1
Supply power to the camcorder, and
insert the recorded Mini DV cassette.
2
Open the LCD monitor and adjust the
angle.
3
Set the Media Selection
switch to TAPE.
4
Hold down the Lock
button and set the
POWER switch to VCR.
• The camcorder turns on
in TAPE-VCR mode.
5
Touch [REW] or [FF] to rewind or fast
forward the tape to the desired point.
25
E
Speaker
Lock button
1 / 3
D I SP
REW
P L A Y /
ST I L L
F F
S T OP
6 0min
6
Touch [PLAY/STILL] to begin playback.
• The indicators on the playback opera-
tion on-screen buttons change to
symbols after playback begins.
1 / 3
D I
REW
P L A Y /
ST I L L
F F
S T OP
To stop playback
Touch [b] (Stop).
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.
Note:
• The tape is automatically rewound when
playback reaches the end of the tape.
Watching the Playback in the
Viewfinder
You can also watch the playback in the
viewfinder by closing the LCD monitor with the
screen facing in.
CONTROL dial
• To operate the playback functions, turn the
CONTROL dial to select the desired playback
operation indicator, and then press the dial.
• To turn off the playback operation indicators,
turn the CONTROL dial to select "DISP", and
then press the dial. Press the CONTROL dial
again to turn them back on.
Note:
• You cannot monitor the sound through the
speaker when watching the playback in the
viewfinder.
1 / 3 D I SP
/
6 0min
Advertisement
Table of Contents
