1. SPECIFICATIONS .............................................................................................................................. 2
2. PART NAMES ..................................................................................................................................... 3
3. DISASSEMBLY OF THE SET ............................................................................................................ 4
ITEMS AND INTERVALS ................................................................................................................... 7
7. TAPE RUNNING ADJUSTMENT ...................................................................................................... 11
10.USEFUL TIPS ................................................................................................................................... 40
11.SIGNAL FLOW DIAGRAMS ............................................................................................................. 41
12.BLOCK DIAGRAMS .......................................................................................................................... 44
13.SCHEMATIC DIAGRAMS ................................................................................................................. 50
16.REPLACEMENT PARTS LIST........................................................................................................ 123
17.PACKING OF THE SET .................................................................................................................. 145
SERVICE MANUAL
LIQUID CRYSTAL DIGITAL CAMCORDER
MODELS
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
CONTENTS
SHARP CORPORATION
1
VL-PD3AS/AH/AE
VL-PD3AS/AH/AE
S60D2VL-PD3AS
VL-PD3AS
VL-PD3AH
VL-PD3AE
Page
PAL
Need help?
Do you have a question about the VL-PD3AS and is the answer not in the manual?
Questions and answers
H i What Leads/Connectors do I need to connect to my new all in one PC tried using PC jack plug to USB & HMDI but nothing Hope you can help
To connect a Sharp VL-PD3AS camcorder to an all-in-one PC, you will typically need:
1. Video Output Cable – The camcorder provides a 1.0 Vp-p 75-ohm unbalanced video output, so you may need an AV cable (composite video RCA to 3.5mm or RCA to USB adapter) if the PC lacks direct RCA input.
2. Audio Output Cable – The audio output level is -8 dBs with an impedance of less than 2.2 kΩ, so an RCA-to-3.5mm audio cable or an RCA-to-USB adapter may be required.
3. FireWire (IEEE 1394) Cable – If the camcorder has a FireWire (IEEE 1394) port, and the all-in-one PC has a corresponding port, a FireWire cable (4-pin to 6-pin or 4-pin to USB adapter) may be needed for digital transfer.
4. USB Capture Device – If the PC lacks RCA or FireWire inputs, a USB video capture adapter (RCA-to-USB or FireWire-to-USB) may be necessary.
5. Power Supply – Ensure the camcorder is powered using a DC 7.4V adapter or battery while connected.
These connections allow video and audio transfer from the VL-PD3AS to an all-in-one PC for playback or recording.
This answer is automatically generated