Using The Time Code - Sharp ViewCam Slim VL-ME100E Operation Manual

Useful Features
Playback

Using the Time Code

Available modes: TAPE-VCR, TAPE-CAMERA,
DUAL-CAMERA
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/25 sec.). This is automati-
cally recorded along with the subject when you
are recording on the tape. You can display the
time code on the screen to check the elapsed
time when playing back from tape or recording
on tape.
Display format
T C 0 0 0
Minute
Hour
1
In TAPE-VCR, TAPE-CAMERA, or
DUAL-CAMERA mode, display the
menu screen (see page 31).
2
Touch [K] or [L] to select "R", and
then touch [SET]. Touch [K] or [L] to
select "TIME CODE", and then touch
[SET].
3
Touch [K] or [L] to select "DISP.ON",
and then touch [SET].
T I ME COD E
51
E
1 0 2 0
Frame number*
Second
*Displayed during still
or frame advance
playback.
O T H E R S
REMO T E
SOUND
T I ME C ODE D I S P. O F F
T C OU T D I SP. ON
I ND E X SRCH
RE T URN
S E T
D I SP. ON
4
Touch [RETURN] until the menu screen
turns off.
• The time code is displayed.
RE -
TURN
To turn off the time code
Select "DISP.OFF" and then touch [SET] in step
3 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a TV
during tape playback
1
In TAPE-VCR mode, display the menu
screen (see page 31).
2
Touch [K] or [L] to select "R", and
then touch [SET]. Touch [K] or [L] to
select "TC OUT", and then touch [SET].
3
Touch [K] or [L] to select "ON", and
RE -
TURN
then touch [SET].
T C OU T
4
Touch [RETURN] until the menu screen
turns off.
3 / 3 D I SP
T C 0 : 0 5 : 3 5
AUD I O
AUD I O 1 + 2
I NDE X
Time code
O T H E R S
REMO T E
SOUND
T I ME CODE
T C OU T O F F
ON
I ND E X SRCH
RE T URN
S E T RE -
TURN
ON