Digital Image Stabilization (Dis) - Sharp VL-Z400S Operation Manual

Useful Features
Camera Recording
Digital Image
Stabilization (DIS)
Available mode:
Tape Camera
The digital image stabilization (DIS) function
allows you to stabilize the image by
electronically compensating for relatively
minor image shaking that is often annoying
in close-up shots.
1
In Tape Camera mode, press the
MENU button to display the menu
screen.
2
Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3
Press l or m to select "DIS", then
press the centre of the Operation
button.
S E T T I N G 2
D I S
A UD I O MOD E
W I N D
PHO N E S V O L
R E T U RN
4
Press l or m to select "ON", then
press the centre of the Operation
button.
D I S
40
ON
O F F
ON
5
Press the MENU button to turn off the
menu screen.
• The DIS indicator only appears when
the on-screen indicators are turned
on.
To cancel DIS function
Select "OFF" in step 4 above. The z
indicator will disappear.
Notes:
• The DIS function cannot compensate for
excessive image shaking.
• When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn
off the DIS function. The picture will appear
more natural when the DIS function is off.
DIS indicator
P A U S E