Using The Flash Light (Optional Accessory) - Sharp ViewCam Slim VL-ME100E Operation Manual

Liquid crystal display camcorder
Table of Contents

Advertisement

Using the Flash Light
(Optional Accessory)
Available mode: CARD-CAMERA
Using the flash function of the optional IR &
Flash Light enables you to record good-quality
still images even in dark locations.
Mounting the IR & Flash Light
1
Hold the IR & Flash Light as shown in
the figure, and mount it to the accessory
shoe by sliding it in the direction of the
arrow until it locks into place.
2
Turn the screw in the direction of the
arrow to secure the IR & Flash Light.
Removing the IR & Flash Light
Turn the screw in the opposite direction than
when mounting, and then pull off the IR & Flash
Light.
Caution:
• Do not pick up the camcorder by the IR & Flash
Light, as this may cause the camcorder or IR &
Flash Light to break down.
Notes:
• Using the optional IR & Flash Light will shorten
the continuous camera recording time with the
battery pack.
• For details, see the operation manual of the
optional IR & Flash Light.
Accessory shoe
Screw
Selecting Flash Mode
Flash mode options
AUTO: Flash automatically fires in dark
locations (when "LIGHT" is displayed on the
screen) each time you press the STILL
button.
ON: Flash fires every time you press the STILL
button.
1
Mount the IR & Flash Light to the
camcorder. Set the Power switch on the
IR & Flash Light to FLASH.
2
In CARD-CAMERA mode, display the
menu screen (see page 31).
3
Touch [K] or [L] to select "W", and
then touch [SET]. Touch [K] or [L] to
select "FLASH", and then touch [SET].
4
Touch [K] or [L] to select "AUTO" or
"ON", and then touch [SET].
F L A SH
5
Touch [RETURN] until the menu screen
turns off.
• The
indicator is displayed.
RE -
TURN
Caution:
• You should never use the flash with the
camcorder close to another person.
Notes:
• The
indicator flashes while the flash is being
charged.
• If you press the STILL button while the
flashing, flash does not fire but a still image of the
subject is recorded.
• Flash cannot be used when the SUPER CAT'S
EYE switch is set to ON.
C AME RA S E T
RE C MODE
I MAGE S I Z E
GU I D E F RM
F L A SH
AU T O
RE T URN
ON
S E T
RE -
TURN
AU TO
1 / 1 D I SP
C ARD
3 / 2 1
GAMMA
E F F .
NORMA L
[ 1 2 8 0 ]
SE L F -
Flash indicator
indicator is
90
E

Advertisement

Table of Contents
loading

Table of Contents