Using The Flash Light (Optional Accessory) - Sharp VL-ME10E Operating Manual

Table of Contents

Advertisement

Digital Still Camera Features
Camera Recording
Using the Flash Light
(Optional Accessory)
Available mode: CARD-CAMERA
Using the flash function of the optional IR &
Flash Light VR-3VIF enables you to record
good-quality still images even in dark locations.
Mounting the IR & Flash Light
1
Hold the IR & Flash Light as shown in
the figure, and mount it to the accessory
shoe by sliding it in the direction of the
arrow until it locks into place.
2
Turn the screw in the direction of the
arrow to secure the IR & Flash Light.
Removing the IR & Flash Light
Turn the screw in the opposite direction than
when mounting, and then pull off the IR & Flash
Light.
Caution:
• Do not pick up the camcorder by the IR & Flash
Light, as this may cause the camcorder or IR &
Flash Light to break down.
Notes:
• Using the optional IR & Flash Light will shorten
the continuous camera recording time with the
battery pack.
• For details, see the operation manual of the
optional IR & Flash Light.
• The IR light cannot be used, even if the VR-3VIF
is mounted on the camcorder.
77
All manuals and user guides at all-guides.com
Accessory shoe
Screw
Selecting Flash Mode
Flash mode options
AUTO: Flash automatically fires when in a dark
location ("LIGHT" is displayed on the screen)
each time you press the STILL button.
ON: Flash fires every time you press the STILL
button.
1
Mount the IR & Flash Light to the
camcorder and then set the Power
switch on the IR & Flash Light to
FLASH.
2
In CARD-CAMERA mode, display the
menu screen.
3
Select W, then press SET. Press a or
s to select "FLASH", then press SET.
CAMERA SE T
RE C MODE
SNAP E F F.
SET
DG T L ZOOM
a
s
GU I DE
FLASH
RETURN
a
4
Press a or s to select "AUTO" or "ON",
then press SET.
FLASH
5
Press the MENU/DISPLAY button until
the menu screen turns off.
• The
indicator is displayed.
AUTO
Caution:
• You should never use the flash with the
camcorder close to another person.
Notes:
• The
indicator flashes while the flash is being
charged.
• If you press the STILL button while the
indicator is flashing, flash does not fire but a still
image of the subject is recorded.
CARD
FRM
AUTO
ON
SET
s
AUTO
CARD
1
0
9 0
NORMA L
Flash indicator

Advertisement

Table of Contents
loading

Table of Contents