If any of the original wires as supplied with the
appliance must be replaced, it must be replaced
with CSA type SEW (200
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
NATURAL GAS
For
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
Hampton® H15-1 Direct Vent Freestanding Gas Stove
WIRING DIAGRAMS
Caution: Ensure that the wires do
not touch any hot surfaces and are
o
C) or its equivalent.
away from sharp edges.
Units and Units
WARNING: Electrical Grounding Instructions
CAUTION: Label all wires prior
to disconnection when servic-
ing controls. Wiring errors can
cause improper and dangerous
operation.
NOT
Equipped with DC Spark Boxes
INSTALLATION
37