Rigid Pipe Venting Systems - HAMPTON BAY Hamilton H15 Owners & Installation Manual

INSTALLATION
Alternate
Horizontal
Termination
Caps
WARNING:
Do not combine venting components from
different venting systems.
However use of the the AstroCap
Riser is acceptable with all systems.
This product has been evaluated by Intertek
for using a Rigid Pipe Adaptor in conjunction
with Duravent Direct-Vent, Selkirk Direct-Temp,
Ameri Vent Direct venting and Security Secure
Vent systems. Use of these systems with the
Rigid Pipe adaptor is deemed acceptable
and does not affect the Intertek WHI listing of
components.
TM
The FPI AstroCap and FPI Riser Vent terminal are certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent
American Metal Products Ameri Vent Direct Vent, Security Secure Vent
Products International Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
16

RIGID PIPE VENTING SYSTEMS

Horizontal or Vertical Terminations
Vertical
Termination
Cap
Storm Collar
Flashing
Ceiling Firestop
Pipe Length
TM and FPI
Standoff (Optional)
Adj.Pipe Length
11" - 14-5/8"
o
90 Elbow
24" Pipe
Length
Simpson Dura-Vent, 3 screws must be
®
, Selkirk Direct-Temp. AstroCap
Hampton® H15-1 Direct Vent Freestanding Gas Stove
Max.
Vinyl Siding
Termination
Wall Thimble
When using Rigid Vent other than
used to secure rigid pipe to adaptor.
®
Direct Vent,
TM
is a proprietary trademark of FPI Fireplace
Horizontal
Cap