Projecting Images From The Computer; If The Monitor Port Is A Mini D-Sub 15-Pin Port; If The Monitor Port Is A 5Bnc Port - Epson EMP-53 User Manual

Connecting to a Computer

Projecting Images from the Computer

The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type
of port your computer has.

If the Monitor Port is a Mini D-Sub 15-pin Port

Use the accessory computer cable to connect the Computer/Component
Video port at the rear of the projector to the monitor port of the computer.
To monitor port
Computer cable
(accessory)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer".
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to select the Computer port
as the input source. p.28
• Do not bind the power cable and the computer cable together,
otherwise image interference or errors in operation may result.
To Computer/
Component
Video port (blue)
p.46
If the Monitor Port is a 5BNC
Use the optional VGA- HD15/BNC PC Cable to connect the Computer/
Component Video port at the rear of the projector to the monitor port of the
computer. See "Appendices: Optional Accessories"
To monitor port
VGA- HD15/BNC PC Cable
(optional)
TIP
• After projection starts, change the "Input Signal" setting in the
"Video" menu to "Computer".
• If more than one external component is connected to the projector,
use the [Source] button on the projector's control panel or the
[Computer] button on the remote control to select the Computer port
as the input source. p.28
• Do not bind the power cable and the computer cable together,
otherwise image interference or errors in operation may result.
Port
p.84
To Computer/
Component Video
port (blue)
p.46
16