If The Monitor Port Is A 5Bnc Port - Epson EMP-735 User Manual

Connecting to a Computer
If the Monitor Port is a 5BNC
Use the optional VGA-HD15/BNC PC cable to connect the Computer/
Component Video port at the rear of the projector to the monitor port of the
computer.
See "Appendices: Optional Accessories" (
To monitor port
Tip :
• After starting projection, set to "Computer" by selecting "Video" - "Input Signal" on the
configuration menu. (
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Comp/EasyMP] button on the remote
control to select the Computer port as the input source. (
• Do not bind the power cable and the computer cable together, otherwise image
interference or errors in operation may result.
Port
VGA-HD15/BNC PC
cable (optional)
p.45)
15
EMP-735 User's Guide
p.94)
To Computer/Component
Video port (blue)
p.27)