Configuring The Projector - Epson BrightLink 450Wi User Manual

Using the Projector on a Network
94

Configuring the Projector

1. Press the button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
4. Make sure Wireless LAN Power is set to
to prevent unauthorized access.
5. Select one of the following connection modes:
■ mode lets you easily connect one computer to the
Quick
projector at a time. You can also select this setting when
you're using the optional Epson Quick Wireless Connection
USB key.
■ Advanced mode lets multiple computers access the projector
at the same time and easily trade off control of the projector.
This method requires a wireless network access point or an
AirPort Extreme (or AirPort) base station.
6. If your network is using 802.11a, use the arrow buttons on the
remote control to highlight
Press to return to the previous menu.
Esc
Network
and press
Enter
and press . You see this screen:
Enter
. You can turn it off
On
, then press
802.11a
and press .
Enter
.
to select it.
Enter