Assigning A Pattern To The User Button; Creating Your Own Pattern - Epson BrightLink 450Wi User Manual

Interactive projector
Hide thumbs Also See for BrightLink 450Wi:
Table of Contents

Advertisement

4. Select one of the patterns shown on page 62, or choose
. If you want to create your own pattern, choose
Pattern
. See below for more information.
Pattern
5. Press
to select the pattern you want, then press
Enter
6. Choose
Pattern Display
7. Press
when you're finished displaying the pattern.
Esc

Assigning a Pattern to the User Button

You can assign any of the available patterns to the
remote control, and then display it by simply pressing the
button.
1. In the Settings menu, select the
page 62.
2. Highlight
User Button
3. Highlight
Pattern Display
4. Press
to exit.
Menu

Creating Your Own Pattern

You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the
button as described above, you can display it any time you want by
simply pressing the
User
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight
2. Select
User Pattern
3. When you see a message asking if you want to use the current
image as the pattern, select
4. Press
again.
Enter
to display the pattern.
Pattern Type
and press
.
Enter
and press
Enter
button on the remote control.
and press
Pattern
and press
.
Enter
and press
Yes
Enter
Test
User
.
Esc
button on the
User
User
as described on
.
User
.
Enter
.
Presenting With the Remote Control
note
When you choose an image
for the user pattern, it erases
any previously used image.
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brightlink 450wirm

Table of Contents