Using the Projector on a Network
82
Access Point mode (infrastructure mode) lets multiple computers
■
access the projector at the same time and easily trade off control
over the projector. To use Access Point mode, you need a wireless
(802.11g, 802.11b, or 802.11a) access point or an AirPort
Extreme (or AirPort) base station, and one or more computers
with wireless network cards or adapters.
Configuring the Projector
1. Press the
button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
4. Make sure Wireless LAN Power is set to
to prevent unauthorized access.
5. Select one of the following connection modes:
mode lets you easily connect one computer to the
■
Quick
projector at a time. You can also select this setting when
you're using the optional Epson Quick Wireless Connection
USB key.
mode lets multiple computers access the projector
■
Advanced
at the same time and easily trade off control of the projector.
This method requires a wireless network access point or an
AirPort Extreme (or AirPort) base station.
Network
and press
Enter
and press
. You see this screen:
Enter
. You can turn it off
On
and press
.
Enter
.