Epson BrightLink 450Wi User Manual page 72

note
The available settings vary
depending on the input
source selected.
The setting
Brightness
changes the opacity of the
projector's LCD panels. You
can also change the lamp's
brightness. Select
Power
in the
Consumption
Settings menu, then choose
or (the
Normal ECO
default setting is ).
Normal
Using the Projector Menus
72
2. Adjust the desired options as needed:
■
Color Mode
Lets you quickly adjust the color and brightness for various
environments. You can save a different setting for each
source. See page 45 for a description of each color mode.
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
■ Color Saturation
Adjusts the color depth of the image.
■ Tint
Adjusts the balance of green to magenta in the image.
■
Sharpness
Adjusts the sharpness of the image.
■
Color Adjustment
Adjusts the color values. Select
the overall value from 5000 °K (red) to 10000 °K (blue).
Select ,
Red Green
and saturation values. (Not available if
Color Mode setting.)
■
Auto Iris
Automatically adjusts the projected luminance according to
the brightness of the image. (Available only when
or is selected as the Color Mode for the current
Theater
input source.)
Abs. Color Temp
, to adjust red, green, and blue hue
Blue
sRGB
. to adjust
is selected as the
Dynamic