Solving Problems With The Image Or Sound - Epson BrightLink 450Wi User Manual

Solving Problems
126
If nothing is projected after the drivers are installed, do one of the
■
following:
Windows: Select
EPSON Projector
.
Display Vx.x
Mac OS: Click the
see it, open the
USB Display
and run
USB Display
Make sure
■
USB Type B
(see page 78).
Display
In Windows, if the mouse pointer flickers, select
■
>
Programs EPSON Projector
EPSON USB Display Vx.x
checkbox.
window
Solving Problems With the Image
or Sound
No image appears on the screen.
Check that the Ppower light is green and not flashing. Also press
■
the button on the remote control to make sure the
A/V Mute
picture has not been turned off temporarily.
■ The projector may be in standby or sleep mode. If the Ppower
light is orange, press the Ppower button to turn the projector on.
If the power was switched off and then on again, the projector
■
may be cooling down. Wait until the Ppower light stops flashing
and remains orange; then press the Ppower button again.
The attached computer may be in sleep mode or displaying a
■
black screen saver. Try pressing a key on the computer.
■ If you are projecting from a DVD player or other video source,
make sure you turn it on and press its
or >
Start All Programs
>
EPSON USB Display
icon in the Dock. If you don't
USB Display
folder in the Applications folder
.
in the Extended menu is set to
>
EPSON USB Display
., then clear the
Play
or >
Programs
>
EPSON USB
USB
or
All Programs
>
Transfer layered
button.