Selecting Wireless Network Settings In Windows; Selecting Wireless Network Settings In Mac Os - Epson BrightLink 450Wi User Manual

note
Settings may vary,
depending on your wireless
network adapter. See the
documentation for your
adapter for more
information.
Using the Projector on a Network
96
11. When you're done making these settings, press
and press
Complete
save your settings.
Now you're ready to select the wireless network your computer, as
described below.
Selecting Wireless Network Settings in
Windows
Before connecting to the projector, select the correct wireless network
on your computer.
1. To access your wireless utility software, double-click the network
icon on the Windows taskbar.
2. Do one of the following:
If your projector is set up on an existing network (Advanced
■
mode), select the network name (SSID).
If your projector is configured for Quick mode, select the
■
SSID you assigned to the projector.
3. Click .
Connect
Now you're ready to connect to the projector. See the EasyMP
Network Projection Operation Guide for details.

Selecting Wireless Network Settings in Mac OS

Before connecting to the projector, select the correct wireless network
on your computer.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
■ If your projector is set up on an existing network (Advanced
mode), select the network name (SSID).
■ If your projector is configured for Quick mode, select the
SSID you assigned to the projector.
, then choose
Enter Yes
. Choose
Esc
and press to
Enter