Using Wireless Security Options; Enabling Wep Encryption - Epson BrightLink 450Wi User Manual

Using Wireless Security Options

The projector includes WEP and WPA data encryption security
options which you can enable for network projection.
Make sure the settings you select match the ones used by your
network; follow the directions from your network administrator.
See the following sections to enable security options on your
projector:
"Enabling WEP Encryption" below
■
"Enabling WPA Security" on page 99
■
You also need to enable security settings from EasyMP Network
Projection (see page 100).

Enabling WEP Encryption

1. Press on the projector remote. Highlight
Menu
then press .
Enter
2. Choose
Network Configuration
3. Highlight
Security
screen:
4. Press to select Security, then select
Enter
Press to return to the previous menu.
Esc
and press
, then press . You see the following
Enter
WEP
and
Network
.
Enter
and press .
Enter
Using the Projector on a Network
note
The authentication and
firewall features are only
effective when the access
point for the connection
destination supports the
same functions.
97