Connecting To Video Equipment; Connecting A Composite Video Source - Epson BrightLink 450Wi User Manual

Connecting to Video Equipment

You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has a yellow RCA video output connector, see
"Connecting a Composite Video Source" on page 29.
■ If your video player has an S-Video connector, see "Connecting
an S-Video Source" on page 30.
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a
Component Video Source" on page 31.
If your video player has an RGB video port, see "Connecting an
■
RGB Video Source" on page 32.
After connecting video cables, you may also want to connect an
optional audio cable to play sound through the projector; see page 33.

Connecting a Composite Video Source

1. If your video cable has an RCA connector, connect it to the
yellow video output connector on your player and the yellow
port on the projector.
Video
Video port
2. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
Connecting to Computers, USB Devices, and Other Equipment
note
If the video cable was not
provided with your video
device, you can purchase one
from an electronics dealer.
29