Epson BrightLink 450Wi User Manual page 129

The projector and notebook don't display the same image
If you're projecting from a notebook, and you can't see your image on
the projection screen and on your computer at the same time, follow
these guidelines.
If you're using a PC notebook:
On most systems, there's a function key that lets you toggle
■
between the LCD screen and the projector, or display on both at
the same time. It may be labeled
. You may have to hold down the
Allow a few seconds for the projector to sync up after changing
the setting.
■ If the function key doesn't permit you to display simultaneously
on both screens, you should check your monitor settings to make
sure both the LCD screen and the external monitor port are
enabled.
From the Control Panel, open the
option, then select the
Settings
Vista, right-click on the desktop, select
, then select
Display Settings
for adjusting the settings varies by brand; you may need to click a
tab, then make sure the external Monitor port is set as
Monitor
your primary display and/or enabled. See your computer's
documentation or online help for details.
If you're using Mac OS X:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Make sure your projector is connected and
follow these steps:
1. Open
System Preferences
2. Click or
Display Displays
3. Click
Detect Displays
or have an icon such as
CRT/LCD
key while pressing it.
Fn
utility, select the
Display
option (in Windows
Advanced
Personalize
Advanced Settings
.
.
.
, select
). The method
Solving Problems
129