Restoring The Default Settings; Adjusting The Image - Epson BrightLink 450Wi User Manual

5. After changing the settings, press the
changes and return to the previous menu (or press it again to exit
the menu system). You can also press the

Restoring the Default Settings

You can use the
Reset
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the menu, highlight
Reset
to confirm.
Yes

Adjusting the Image

You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and
Auto Iris
1. Press the button on the projector or remote control and
Menu
select the menu. You see a screen similar to one of these:
Image
Computer/USB/USB Display/LAN
Esc
option on any menu to restore the
, press
Reset All
settings.
Component video/
Composite video/
S-Video
button to save your
button to exit.
Menu
, and select
Enter
Using the Projector Menus
note
When you select
Reset All
in the Reset menu, it does
not reset the Input Signal,
User's Logo, Language, or
Lamp Hours settings.
71