Epson BrightLink 450Wi User Manual page 127

If you are projecting video from a laptop, you may need to set the
■
laptop to external output only.
If you are projecting from a composite or S-Video video source,
■
make sure the Video Signal setting is correct (see page 73).
You can also try resetting all of the menu settings (see page 71).
■
If you're projecting through your computer's USB port, make
■
sure the
USB Type B
(see page 78).
Display
With Windows, you may need to install the USB display drivers
manually by clicking
>
EPSON_PJ_UD
the USB display drivers are installed, click
>
Programs EPSON Projector
EPSON USB Display Vx.x
With Mac OS X, click the
there is no USB Display icon in the Dock, open the
folder in the Applications folder and run
■ If you see a black screen and you are connected through your
computer's USB port (or through your network), the application
may be using DirectX drawing features, which are not supported.
You've connected a computer and see a blue screen with the
message displayed.
No Signal
Make sure the cables are connected correctly, as described
■
beginning on page 24.
If you've connected a computer and one or more video sources,
■
you may need to press the
correct source. Allow a few seconds for the projector to sync up
after pressing the button.
Make sure the power for your connected equipment is turned on.
■
setting in the Extended menu is set to
or
My Computer Computer
. If nothing is projected after
EMP_UDSE.EXE
>
EPSON USB Display
on your computer.
icon in the Dock. If
USB Display
USB Display
Source Search
USB
>
or
All Programs
>
USB Display
.
button to select the
Solving Problems
127