Epson BrightLink 450Wi User Manual page 95

7. Highlight , press
SSID
assign to the projector (Quick mode), or the name of your
existing wireless network (Advanced mode):
Use the arrow buttons to select individual letters; then press
to input a character. To add a blank space or to navigate backward
and forward through the input text, highlight the arrows and
press . To toggle symbol settings or capital letters, highlight
Enter
the option and press
and press .
Enter
Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
8. Select
IP Settings
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
■ If your network does not assign addresses automatically, turn
off and enter the projector's
DHCP
, and
Mask Gateway Address
To enter numbers, use the arrow buttons on the remote
control to select each number on the screen, then press the
button. When you're finished entering an address in
Enter
the network menu, highlight
button.
9. If you want to prevent the SSID from being displayed on the
standby screen, set the
10. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
the previous menu.
, and enter the name you want to
Enter
. When you're done, highlight
Enter
and do one of the following:
IP Address
, as needed.
, then press the
Finish
option to
SSID Display
setting to
Off
Enter
Finish
,
Subnet
Enter
.
Off
. Press to return to
Esc
Using the Projector on a Network
note
For specific details about
your network, please consult
your network administrator.
If you're using AirPort, start
the AirPort Admin utility,
select your base station and
click . Then click
Configure
the Network tab to see your
base station's IP address.
95