Table 40. Bios Setup, Cd/Dvd Drives Sub-Menu Selections; Table 41. Bios Setup, Security Menu Options - Intel SE7525RP2 Technical Manual

Intel® Server Board SE7320EP2 / Intel® Server Board SE7525RP2 TPS
BIOS
6.4.5.3.2.3 ATAPI CDROM drives sub-menu selections

Table 40. BIOS Setup, CD/DVD Drives Sub-menu Selections

Feature Options
CD/DVD Drives
1st Drive Varies Specifies the boot sequence from the available
devices.
nth Drive Varies Specifies the boot sequence from the available
devices.
6.4.5.4 Security Menu
Feature
Security Settings
Administrator N/A
Password is
User Password is N/A
Set Admin N/A
Password
Set User Password N/A
User Access Level No Access
View Only
Limited
Full Access
Clear User N/A
Password
Fixed disk boot
Disabled
sector protection
Enabled
Password On Boot
Disabled
Enabled
NMI Control
Disabled
Enabled
Revision 1.0
Help Text

Table 41. BIOS Setup, Security Menu Options

Options
Install / Not installed
Install / Not installed
Set or clear Admin password
Set or clear User password
No Access: prevents User access
to the Setup Utility.
View Only: allows access to the
Setup Utility but the fields can not
be changed.
Limited: allows only limited fields
to be changed such as Date and
Time.
Full Access: allows any field to be
changed.
Immediately clears the user
password.
Enable/Disable Boot Sector Virus
Protection.
If enabled, requires password
entry before boot.
Enable / disable NMI control for
the front panel NMI button.
Intel order number D24635-001
Varies based on system configuration.
Varies based on system configuration.
Help Text
Informational display.
Informational display.
Pressing enter twice will clear the
password. This option is grayed
out when entering setup with a
user password.
Pressing enter twice will clear the
password.
This node is grayed out and
becomes active only when Admin
password is set.
Admin uses this option to clear
User password (Admin password
is used to enter setup is required).
This option is not available to
change if the Administrator
password is not configured.
This option is not available to
change if the User password is not
configured.
Description
Description
71