Preface; About This Document - Intergraph InterServe 8000 Setup Manual

Preface

The InterServe 8000 System Setup contains information for setting up and configuring your
InterServe™ 8000 server.

About This Document

The InterServe 8000 System Setup is organized as follows:
u
Chapter 1, "Installing a Deskside System," provides instructions for setting up a
deskside system or rack-mount system, and installing disk drives.
u
Chapter 2, "Setting Up the System Software," describes starting the system for the first
time, going through Windows NT Setup, and using the Welcome dialog.
u
Chapter 3, "Configuring the System," describes configuring the system with Windows
NT Server and other software provided by Intergraph.
u
Chapter 4, "Using the System," describes how to start, stop, and restart the system. It
also describes how to use the system alerts, LCD screen, system status menus, RAID
section menus, and the status LEDs.
u
Chapter 5, "Configuring the BIOS," describes how to use AMIBIOS Setup, reprogram
the BIOS, change the system boot sequence, and assign system resources for option
cards.
u
Chapter 6, "Troubleshooting," provides a list of system problems and ways to correct
them.
u
Chapter 7, "Installing System Software," provides information you will need to install
the operating system and associated system software.
u
Appendix A, "System Power," provides system power information, such as operating
voltages, rated current and rated load.
ix