Turn Off The Raid Alarm - Intergraph InterServe 8000 Setup Manual

When you press the
RAID status displays, such as:
Status: OK
If FAIL displays, the malfunctioning component within the internal RAID section also
displays. From the RAID status screen, press the
menu options:
TURN OFF ALARM
HARDWARE MENU
OPTIONS MENU
NOTE The
MENU
you press the
switches to the system status menus.
To use the RAID Section menu options, move the cursor to an option and press the
button.
u
TURN OFF ALARM option silences the audible alarm when it is sounding. This option
only affects the alarm that sounds in response to a problem with the internal RAID
section.
u
HARDWARE MENU lets you check the firmware version, power on self-test (POST)
results, and the temperature of the RAID array.
u
OPTIONS MENU contains settings for RAID SCSI IDs, SCSI bus termination, and
internal heat threshold.
NOTE Intergraph recommends that you do not change the default settings for any of the items
available under the

Turn Off the RAID Alarm

To silence the alarm while it is sounding, move the cursor to TURN OFF ALARM and press
.
ENTER
/
SYSTEM RAID
InterRAID-8
button switches the screen between the RAID status and RAID menu options. If
/ button while the RAID status or option menus display, the screen
SYSTEM RAID
OPTIONS MENU
button, to switch to the RAID status menus, the overall
or
Status: FAIL
button to display the RAID section
MENU
.
InterRAID-8
ENTER
69