Intergraph InterServe 8000 Setup Manual page 24

10
6. Secure the base unit to the shelf by installing four screws up through the bottom of the
shelf into the base unit. To prevent the base unit from falling, one person should
support the base unit while the other installs the screws.
7. Push the base unit into the rack until it stops.
8. Disengage the locking tab on the sliding shelf and continue pushing the base unit until it
fully retracts and locks into place.
9. Insert the screw under the shelf handle to secure the sliding shelf to the rack.
10. Connect the cables as described in "Connecting the Cables".