View Simm Socket Information; View I/O Expansion Board Information - Intergraph InterServe 8000 Setup Manual

View SIMM Socket Information

Path: System Config. > Processor Board > Memory > SIMM Rows
Information about each SIMM socket, such as row, interleave and memory module density
(in MB) installed, can be displayed. SIMM sockets are grouped according to rows of the
memory subsystem. Press
displays:
SIMM Rows 0 & 1
SIMM Rows 2 & 3
SIMM Rows 4 & 5
SIMM Rows 6 & 7
To display information about the sockets included in each row, move the cursor to a row and
press
ENTER
J33 I3: status (Vacant or XXMB, XXns)
The JXX number identifies the socket number that is printed on the processor board. The I X
number indicates the interleave value of that socket in the row. If a memory module is
installed, its size and speed display. When the system power is off, socket information
cannot be displayed. System Off appears for each socket in this case.
NOTE The System Reference contains a detailed discussion of the memory subsystem, rows, and
interleaves.

View I/O Expansion Board Information

Path: System Config. > I/O Expansion Bd.
When you move the cursor to I/O Expansion Board and press
(MSMT451XX), its engineering change level ( ECO XX), and serial number display.
Additionally, you can view expansion slot information as described next.
NOTE The
Serial#
when the cursor is on Memory: status. The screen
ENTER
. The status of each socket in the row displays, such as:
line does not display if the board does not have a valid serial number.
, the board part number
ENTER
63