liGhT FiXTure hArdWAre (not to scale)
light kit
Step 5a. locate the three switch housing plate screws
in pack E. Screw in part way two of the three screws
in the switch housing plate as shown in Figure #1.
Step 5b. Hold the light kit up to the motor. Feed the
wires through the center hole and align the two switch
housing screws with the keyholes. Twist the switch
housing clockwise as shown in Figures # 2.
Step 5c. Insert the third screw and tighten screws with
the provided screw driver attaching the light kit to the
switch housing plate as shown in Figure #3.
Figure #2
liGhT FiXTure iNsTAllATioN
Pack e
socket Plate
screws (3)
Pack e
switch housing Plate
screws (3)
V
ermont
socket Plate
lightbulb shield
switch housing
Plate
Figure #1
switch
housing Plate
light kit
Figure #3
®
halogen lightbulb
Glass shade
switch housing
Plate screws
switch housing
Plate screws
light kit
Wiring
13