Motor Housing Installation; Screw Pack (B) Hole Plugs; Screw Pack (B); Motor Housing Mounting Screws - Casablanca C3443001 AT0209 Owner's Manual

MoTor housiNG iNsTAllATioN

CeiliNG brACkeT hArdWAre (not to scale)

screw Pack (b)

screw Pack (b)
Motor housing Mounting
hole Plugs (4)
screws (2)
Motor housing
Motor Cover
Step 3a. locate and loosen the two motor housing
Mounting screws
mounting screws that are located on the side of the
ceiling mounting bracket as shown in Figure #1.
Step 3b. Install the motor housing by aligning the
two slots on the inside of the motor housing with the
heads of the two mounting screws that are mounted
on each side of the ceiling mounting bracket as shown
in Figure #2. Then rotate the motor housing counter
clockwise until the heads of the two screws on the
Ceiling
ceiling mounting bracket lock together, attaching the
Mounting
bracket
motor cover to the ceiling plate as shown in Figure
#3.
Figure #1
noTE: When aligning the screws, center the motor
housing so that there is an even amount of space all
around the motor.
Motor Cover
Mounting screws
Mounting
slots
Figure #2
Figure #3
10