Table of Contents
Advertisement
V
®
ermont
Step 2c. lift up on the motor, attach the second
hook on the outside of the motor onto one of the
other loops hanging from the ceiling bracket as
shown in Figure #3.
Figure #3
Step 2d. After making the wire connections, the
wires should be tucked in to the outlet box as shown
in Figure #4. The wires should be spread apart, with
the three grounded conductor wires being placed on
one side of the outlet box and the power conductor
wires being placed onto the other side of the outlet
box separating the connections.
noTE: If the color of your ceiling wires differs from
that described, consult an electrician.
Figure #4
Step 2e. lift up on the motor again and place the
third motor hook located on the side. Hang the hook
onto the last hanger loop on the ceiling bracket as
shown in Figure #5.
Figure #5
9
Advertisement
Table of Contents
