Playback - Basics - Sony Handycam DCR-PC9 Operating Instructions Manual

-- Playback - Basics --
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
vou can monitor the playback picture in the viewfinder. You can also control playback
using the Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Press OPEN to open the LCD panel.
(3) Set the POWER switch to VCR while pressing the small green button.
(4) Press _ to rewind the tape.
(5) Press _ to start playback.
(6) Adjust the volume following the steps below.
(!) Press FN to display PAGE1 (p. 20).
(_) Press VOL. The screen to adjust volume appears.
(_) Press -/+ to adjust the volume.
- : to make the volume down
+ : to make the volume up
(7) Press _ OK to return to PAGE1.
2
the bar indicator
1
To return to FN
Press EXIT.
To stop playback
Press_.
34