Cut Recording - Sony Handycam DCR-PC9 Operating Instructions Manual

Frame by frame recording - Cut recording
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately nrove the subject a little and make a cut recording. We
reconrmend that you use a tripod, and operate the camcorder using the Remote
Commander after step 4.
(1) In standby mode, press FN to display PAGE1.
(2) Press MENU, then set FRAME REC to ON in _ in the menu setting (p. 105).
(3) Press EXIT to return to FN.
The FRAME REC indicator lights up.
(4) Press START/STOP to start cut recording. The calncorder makes a recording
for about six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
2
To cancel the cut recording
Perform either of the following:
Set FRAME REC to OFF in the menu settings.
-Set the POWER switch to other than CAMERA mode.
Note
The proper remaining tape time is not indicated if vou Else this function cot'tti/'tElously.
When using the cut recording function
The last recorded cut is longer than other CElts.
62