Using With An Analog Video Unit And Your; Computer Signal Convert - Sony Handycam DCR-PC9 Operating Instructions Manual

Using with an analog video unit and your
computer - Signal convert function
You can capture images and sound from an analog video unit connected to your
computer which has tire i.LINK jack (DV jack) to ?Tour camcorder.
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Set the POWER
switch to VCR.
(2) Press FN to display
PAGE1.
(3) Press MENU, then set A/V ---* DV OUT to ON in _ in the menu settings (p.
i05).
(4) Start playback on the analog video unit.
(5) Start capturing procedures on your computer.
The operation procedures depend on your computer and the software which
you use.
For details on how to capture images, refer to the instruction manual of
computer and the software.
OUT
S VIDEO
VIDKO
_)UD,O
VCR
VIDEO A/V
: Signal flow
(optional)
After capturing images and sound
Stop capturing procedures on your computer, and stop the playback on the analog
video unit.
Notes
• You need to install software which can exchange, video signals.
• Depending on the condition of the analog video signals, the computer may not be able
to output the images correctly when you convert analog video signals into digital
video signals via your camcorder. Depending on the analog video unit, the image may
contain noise or incorrect colors.
• You cannot record or capture the video output via your camcorder when the video
includes copyright protection signals such as ID-2 system.
• You can capture images and sound with an S video cable (optional) instead of the A/
V connecting cable (supplied).
88