Searching The Boundaries Of Recorded; By Title - Title Search; Date Search - Sony Handycam DCR-PC9 Operating Instructions Manual

Searching the boundaries of recorded
tape by title - Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title. Use the Remote Commander for this operation.
Before operation
Set CM SEARCH in _ to ON in the menu settings (p. 105). (The default setting is ON.)
(1)
(2)
Set the POWER switch to VCR.
Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears.
The indicator changes as follows:
*TITLE SEARCH ---* DATE SEARCH ---* PHOTO SEARCH
7
(no indicator) * PHOTO SCAN *---_
(3) Press _
or I_H on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
2
SEARCH
MODE
1
3
o
O
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press • on the Remote Commander.
If you use a tape without cassette memory
You cannot superimpose or search a title.
If a tape has a blank portion between recorded portions
The, title search function may not work corrc_ctly.
To superimpose a title
See page 98.
69