Sony Handycam DCR-PC9 Operating Instructions Manual page 126

Recording an image from a tape as a still
image
Your canrcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick".
Your camcorder can also take in moving picture data through the input connector and
record it as a still image on a "Memory Stick".
Before operation
• Insert a recorded tape into }Tour camcorder.
• Insert a "Memory Stick" into }Tour camcorder.
(1) Set the POWER switch to VCR.
(2) Press _]. The picture recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
CAPTURE appears on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
"Memory Stick". Recording is complete when the bar scroll indicator
disappears.
_;/_ 4 Illlllll_
2
When the access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off, eject a "Memory
Stick" or remox e the battery pack. Otherwise, the image data breakdown mav occur.
If "_" appears on the screen
The inserted "Memory Stick" is incompatible with your camcorder because its format
does not confform with vour camcorder. Check the format of the "Memory Stick".
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
126