Searching A Recording By Date; Date Search - Sony Handycam DCR-PC9 Operating Instructions Manual

Searching a recording by date
- Date search
You can autonratically search for the point where the recording date changes and start
playback from that point (Date search). Use a tape with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Before operation
• You can use this function only when playing back a tape with cassette memory.
• Set CM SEARCH in _ to ON in the menu settings (p. 105). (The default setting is
ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
r TITLE SEARCH ---* DATE SEARCH ---* PHOTO SEARCH
q
(no indicator), PHOTO SCAN 4--
(3) Press _ or _ on the Remote Colnnlander to select the date for playback.
Your carncorder autonlatically starts playback at the beginning of the selected
date.
SEARCH
MODE
3
DATE SEARCH
I SEP_ 5/01
2 SEP/ 6/0/
3 DEC /24/01
4JAN/ 1/02
5 FEB/ _1/02
ApR_ 29102
1
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press • on the Renlote Commander.
7O