Alarm Set - Speco HTSD10X Instruction Manual

10x pan-tilt speed dome camera

Hide thumbs Also See for HTSD10X:

Table of Contents

OSD MENU SETTING

I. ALARM SET

4 Alarm inputs are available and each alarm can activate presets, group tours or patterns.

ALARM NO

ALARM INPUT: OFF

ALARM ACT : 001

SAVE

EXIT

I-1.

ALARM SET – ALARM NO.

Up to 4 alarms are selectable by using the joystick to the right when the cursor is on ALARM NO.

I-2.

ALARM SET – ALARM INPUT

Input alarm provides two different ways - NC (Normal Close) or NO (Normal Close)

I-3.

ALARM SET – ALARM ACT

Alarm activates various surveillance modes with Preset number up to 164, Group tour up

to 8, Pattern up to 8. Move the joystick to the right or left direction to select any preset

number, group tour no. or pattern no.

I-4.

ALARM SET – SAVE

After setting the alarm input parameters, to save the data, move the joystick to the right when the

cursor is on SAVE. After saving the data, the cursor moves to Alarm NO.2 automatically to prepare

the next alarm.

I-5.

ALARM SET –EXIT

To escape this page, move the joystick to the right

* Before activating an Alarm, user must set ALARM ENABLE at DOME SET – ALARM – ENABLE

(Refer to page 15)

ALARM SET

: 01

DEFAULT SETTING

Table of Contents