Speco HTSD37X User Manual
  1. Manuals
  2. Brands
  3. Speco Manuals
  4. Security Camera
  5. HTSD37X
  6. User manual

Speco HTSD37X User Manual

37x optical indoor / outdoor speed dome cameras
Hide thumbs Also See for HTSD37X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
SIPSD37X & HTSD37X
37X Optical Indoor / Outdoor Speed Dome Cameras
Speco Technologies is constantly developing product improvements. We reserve the right to
modify product design and specifications without notice and without incurring any obligation.
Rev. 03082010.
200 New Hightway
Amityville, NY 11701
631-957-8700
www.specotech.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HTSD37X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Speco HTSD37X

Summary of Contents for Speco HTSD37X

  • Page 1 SIPSD37X & HTSD37X 37X Optical Indoor / Outdoor Speed Dome Cameras Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 03082010. 200 New Hightway...
  • Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN THE COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL This lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insulated "dangerous voltage"...

  • Page 3: Important Safety Guide

    Important Safety Guide 1. Read and follow all the Instructions Read all the safety and operating instructions before using the product. 2. Keep this manual Keep this manual for reference in future. 3. Attachments / Accessories Use only the attachments or accessories specified by the manufacturer. 4.
  • Page 4 Caution Operating Before using, make sure that the power supply is properly installed. While operating, if any abnormal condition or malfunction is observed, stop using the product immediately and then contact your local dealer. Handling Do not disassemble or tamper with the parts inside the product. Do not drop or subject the product to shock and vibration as this can damage the product.

  • Page 5: Table Of Contents

    Check Points for Preset and Pattern Function before 37X Speed Dome Camera TABLE OF CONTENTS ① Introduction Package Components Main Part Description ② Installation DIP Switch Setup Installation with Wall Mount Bracket Wiring and Cabling ③ Operation Check Points before Operation Operation OSD Menu Reserved Preset (Hot Keys)

  • Page 6: Features

    Features Powerful Zoom Camera & Setup Options Image Sensor: Sony 1/4" Double density interline transfer CCD Zoom: 37X Optical Zoom, 12X Digital Zoom Day & Night, Privacy Mask and WDR SNR (Super Noise Reduction) Function Various Focus Modes: Auto-Focus, Manual Focus, Semi-Auto Focus Various Setup Options in OSD Menu.

  • Page 7: Ptz(Pan/Tilt/Zoom) Control

    MAX. 8 sets of Swing are programmable. This function is that the camera moves repetitively between two preset positions at programmed speeds. MAX. 4 Patterns are programmable. This function is that the camera memorizes the path (mostly curve path) by the joystick of the controller and revives the trajectory operated by the joystick as closely as possible.
  • Page 8 Network Function(Only for the SIPSD37X) Network functions including remote monitoring, bidirectional audio and others are available through IP based network such as LAN, ADSL/VDSL, and Wireless LAN. For more information, refer to the separated manual for IP Addressable models. Perfect Outdoor Environment Compatibility and Easy Installation The fans and heaters are built-in in the camera for cold and hot temperature environment.

  • Page 9: Package Components

    INTRODUCTION 1 Package Component Product & Accessories Main Body & Surface Mount Bracket Default Accessories [Main Cable, Wrench] Accessories for The Models with Alarm Accessories for The IP Addressable Models In/Out Function [I/O Cable] [Crossover LAN Cable, Audio Cable, CD] SIPSD37X Only Wall Mount Brackets (Included) [Screws : Machine M5×15, Hex Lag #14×50]...

  • Page 10: Main Part Description

    Main Part Description DIP Switch Dome Cover DIP Switch Drop Prevention Spring Mounting Screw Hole Main Connector Sensor I/O Port LAN Port Audio Port Reset Switch 37X Speed Dome Camera Do not detach the protection vinyl from the dome cover before finishing all the installation process to protect the dome cover from scratches or dust.

  • Page 11: Dip Switch Setup

    DIP Switch Setup Before installing the camera, set up the DIP switch to configure the camera ID and the communication protocol. Camera ID Setup 37X Speed Dome Camera ID numbers of cameras are set up with binary numbers. See the examples shown below. Binary Value ex) ID=5 ex) ID=10...
  • Page 12 Adjust the DIP switch after turning off the camera. If you changed the camera protocol by changing the DIP S/W, the change will be effective after you reboot the camera. The factory default protocol is “Pelco-D, 2400 bps”. (HTSD37X) The factory default protocol is “Pelco-D, 9600 bps”. (SIPSD37X) 37X Speed Dome Camera...
  • Page 13 INSTALLATION 2 Terminal Resistor Setup The terminal resistor is used for the following cases. Case 1 : In case that the control cable length between a camera and a controller is relatively very long (1:1 Connection) If the communication cable length is very long, the electrical signal will bound in the terminal point.

  • Page 14: Installation With Wall Mount Bracket

    Installation with Wall Mount Bracket ① Make a hole whose diameter is 30~40mm on the mounting surface to pass the wire(s) and cable(s) through the mounting surface. (In case of the wiring and cabling through the mounting surface only) Then prepare the wall mount bracket.

  • Page 15: Wiring And Cabling

    Wiring and Cabling INTERNET LAN CABLE BROWSER AUDIO CABLE MIC SPEAKER Port Description Main Cable Port Pin Number (RJ45) I/O Cable Port Pin Number (RJ25) 37X Speed Dome Camera POWER MAIN CABLE RS-485 I/O CABLE Connector / Wire Color BNC Connector Yellow Orange White...
  • Page 16 Carefully check the voltage and current capacity of the rated power. The rated power is indicated in the back of main unit. 24VAC is used on the HTSD37X (AC 17V~29V, 1.5A) 12VDC is used on the SIPSD37X (DC11V~18V, 3.0A) For the DC input models, be careful with the polarity of DC power. The system should be permanentally damaged by wrong DC input.
  • Page 17 Video Use BNC coaxial cable only. Alarm Input Before connecting sensors, check driving voltages and output signal types of the sensors. Since output signal types of the sensors are divided into Open Collector type and Voltage Output type in general, the wiring must be done properly after considering those types.

  • Page 18: Check Points Before Operation

    Check Points before Operation Before turning on the system, check if the wire(s) and cable(s) are connected properly. Check if the camera ID on the controller is properly selected. The camera ID must be identical to that of the target camera. The camera ID can be checked by reading the DIP switch of the camera or on OSD.

  • Page 19: Osd Menu

    OSD Menu Function Entering into OSD Reserved Presets (Hot Keys) Description Some Preset numbers are reserved to change some parameters without entering into OSD menu. Hot Keys Go Preset [95] Go Preset [131~134] : Running Pattern Function 1 ~ 4 Go Preset [141~148] : Running Swing Function 1 ~ 8 Go Preset [151~158] : Running Group Function 1 ~ 8 Go Preset [161]...

  • Page 20: Preset

    Preset Function Setting Presets Running Presets Deleting Presets Swing Function Setting Swings Running Swings Deleting Swings 37X Speed Dome Camera MAX. 127 positions are programmable. The Preset number can be assigned from 1 to 128 except 95. Preset 95 is reserved for entering into OSD menu.

  • Page 21: Pattern

    Pattern Function Setting Patterns Running Patterns Deleting Patterns Note) When the system memorizes Patterns, the commands are stored in the momories, not the positions of Pan/Tilt/Zoom. Hence there might be small differences between the original path and the revived path by path type of Patterns. Note that it is not a problem in position precision.

  • Page 22: Group

    Group Function Setting Groups Running Groups Deleting Groups Other Functions Power Up Action Auto Flip Parking Action 37X Speed Dome Camera This function is that the camera memorizes the combination of Presets, Pattern and/or Swings sequently and runs Presets, Pattern and/or Swings repetitively.
  • Page 23 Alarm Input Privacy Zone Mask GLOBAL/LOCAL Image Setup Semi-Auto Focus 37X Speed Dome Camera 3 Alarm Inputs are available. When external sensors activate, the camera runs pre-defined actions such as Preset, Pattern, Swing and Group. After the pre-defined time period passed, “Post Alarm” activates, which is pre-defined.

  • Page 24: Osd Display

    OSD Display Preset Label Camera ID P/T/Z Information Displays the amount of pan from zero degree vertical, the amount of tilt from zero degree horizontal and current compass direction. Also identifies the amount of the zoom magnification. Camera ID Displays the selected Camera ID (Address). Action Title Identfies Actions "SET PRESET xxx"...

  • Page 25: ④ Osd Menu

    Quick Programming Guide The menu items with < > always have sub-menus. To go to submenus or make the cursor move to the right, press NEAR key. To go to the previous-upper level menus, press FAR key. To make a selection, press NEAR key To cancel a selection, press FAR key To move the cursor in the menu, use the joystick to the Up/Down direction or Left/Right direction.

  • Page 26: Display Setup

    Display Setup DISPLAY SETUP ------------------------ CAMERA ID PTZ INFORMATION ACTION TITLE PRESET LABEL ALARM I/O <SET NORTH DIRECTION> <PRIVACY ZONE> BACK EXIT 37X Speed Dome Camera Display setup allows you to program how labels are displayed on the monitor. In case of AUTO, the labels are displayed on the monitor when there are any changes in parameters.

  • Page 27: Privacy Zone Mask Setup

    Compass Direction Setup SET NORTH DIRECTION ------------------------ MOVE TO TARGET POSITION [NEAR:SAVE /FAR:CANCEL Privacy Zone Mask Setup PRIVACY ZONE ------------------------ MASK NO UNDEFINED DISPLAY CLEAR MASK CANCEL <EDIT MASK> BACK EXIT 37X Speed Dome Camera Move the camera to a target position and press NEAR button to save the direction as North.
  • Page 28 Privacy Zone Mask Area Setup EDIT MASK 1 ------------------------ MOVE TO TARGET POSITION [NEAR:SELECT/FAR:CANCEL] Privacy Zone Mask Size Setup EDIT MASK 1 ------------------------ :ADJUST MASK WIDTH] :ADJUST MASK HEIGHT] [NEAR:SAVE /FAR:CANCEL] 37X Speed Dome Camera Move your camera to an area to mask. Then a mask and the menu to adjust the mask size will be displayed.

  • Page 29: Camera Setup

    Camera Setup ZOOM CAMERA SETUP ------------------------ FOCUS MODE SEMIAUTO DIGITAL ZOOM IMAGE FLIP SHARPNESS STABILIZATION <WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP> BACK EXIT 37X Speed Dome Camera Sets the general functions of zoom camera module. Focus Mode [AUTO/MANUAL/SEMIAUTO] Sets camera Focus mode. SEMIAUTO Mode This mode automatically exchanges focus modes between Manual Focus mode and...
  • Page 30 White Balance Setup WB SETUP - GLOBAL ------------------------ WB MODE AUTO ADJUST BLUE ADJUST BACK EXIT 37X Speed Dome Camera Stabilization [ON/OFF] Compensates image vibrations by wind or others. The images with vibrations are compensated by Digital Zoom function and the image resolution with this function should be lower than normal image resolution when this function is turned on.
  • Page 31 Auto Exposure Setup AE SETUP - GLOBAL ------------------------ BACKLIGHT DAY/NIGHT AUTO BRIGHTNESS IRIS AUTO SHUTTER MIDDLE SSNR MIDDLE SENS-UP <AUTO> BACK EXIT 37X Speed Dome Camera Backlight [OFF/WDR/BLC/HLC] or [OFF/BLC/HLC] or [ON/OFF] Sets Backlight Compensation. If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.
  • Page 32 37X Speed Dome Camera IRIS [AUTO/MANUAL(F1.6~F28)] or [AUTO/MANUAL(0~100)] Sets Iris to operate automatically or at a user- defined level. If Iris is set to Auto, Iris has higher priority in adjusting AE and Shutter Speed is fixed. Auto iris is the lens function that automatically opens closes the iris in response to changing light conditions.
  • Page 33 WDR (Wide Dynamic Range) Setup ------------------------ LIMIT MIDDLE LEVEL BACK EXIT HLC (High Light Compensation) Setup ------------------------ LIMIT COLOR BACK EXIT 37X Speed Dome Camera Limit [LOW/MIDDLE/HIGH] Level [0~100] Limit [AUTO/MANUAL] When there are too bright lights, this function blocks light sources on images to have better images.

  • Page 34: Motion Setup

    Motion Setup MOTION SETUP ------------------------ MOTION LOCK PWR UP ACTION AUTO FLIP JOG MAX SPEED 120/SEC JOG DIRECTION INVERSE FRZ IN PRESET <PARKING ACTION SETUP> <ALARM INPUT SETUP> BACK EXIT 37X Speed Dome Camera Sets the general functions of Pan/Tilt motions. Motion [ON/OFF] Lock...
  • Page 35 Parking Action Setup PARKING ACTION SETUP ------------------------ PARK ENABLE WAIT TIME 00:10:00 PARK ACTION HOME BACK EXIT 37X Speed Dome Camera This feature allows the camera to begin a specified action after a programmed time of inactivity. Park Enable [ON/OFF] If Park Enable is set to ON, the camera runs an assigned function automatically if there is no PTZ command during the...
  • Page 36 Alarm Input Setup ALARM INPUT SETUP ------------------------ ALARM NO. TYPE N.OPEN ACTION NOT USED HOLD TIME ENDLESS POST ACTION HOME BACK EXIT 37X Speed Dome Camera Defines Alarm Function. When an alarm is receive, an input signal to the camera triggers the user-defined action programmed for the alarm.

  • Page 37: Preset Setup

    Preset Setup PRESET SETUP ------------------------ PRESET NO. CLR PRESET CANCEL <EDIT SCENE> <EDIT LABEL> LABEL123 RELAY OUT CAM ADJUST GLOBAL BACK EXIT 37X Speed Dome Camera Preset [1~128] Number Selects a preset number to set up. If a selected preset is already defined, the camera moves to the pre-defined position and preset parameters such as Label and CAM Adjust show on the monitor.
  • Page 38 Preset Scene Setup EDIT SCENE - PRESET 1 ------------------------ MOVE TO TARGET POSITION [NEAR:SAVE /FAR:CANCEL] Preset Label Setup EDIT LABEL - PRESET 1 ------------------------ ---------- 1234567890 ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx yz<>-/:. ---------- 37X Speed Dome Camera ○ 1 Use the Joystick to move the camera to a desired position.

  • Page 39: Swing Setup

    Swing Setup SWING SETUP ------------------------ SWING NO. 1ST POS. NOT USED 2ND POS. NOT USED SWING SPEED 30/SEC CLEAR SWING CANCEL RUN SWING BACK EXIT 37X Speed Dome Camera Swing [1~8] Number Selects a Swing number to edit. If the selected Swing is not defined, "NOT USED"...

  • Page 40: Pattern Setup

    Pattern Setup PATTERN SETUP ------------------------ PATTERN NO. UNDEFINED CLR PATTERN CANCEL RUN PATTERN <EDIT PATTERN> BACK EXIT Pattern Edit EDIT PATTERN 1 ------------------------ MOVE TO START POSITION [NEAR:START /FAR:CANCEL] EDIT PATTERN 1 [NEAR:SAVE /FAR:DELETE] 0/0/x1/N 37X Speed Dome Camera Pattern Number [1~4 ] Selects a Pattern number to edit.

  • Page 41: Group Setup

    Group Setup GROUP SETUP ------------------------ GROUP NO. UNDEFINED CLEAR GROUP CANCEL RUN GROUP <EDIT GROUP> BACK EXIT Group Edit EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 NONE 2 NONE 3 NONE 4 NONE 5 NONE ------------------------ SAVE CANCEL [NEAR:EDIT]...
  • Page 42 EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 NONE 2 NONE 3 NONE 4 NONE 5 NONE ------------------------ SAVE :MOVE CURSOR] CANCEL [ :CHANGE VAL.] EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 PRESET 1 00:03 360 2 NONE 3 NONE...
  • Page 43 EDIT GROUP 1 ------------------------ NO ACTION ### DWELL OPT ------------------------ 1 PRESET 1 00:03 360 2 NONE 3 NONE 4 NONE 5 NONE ------------------------ SAVE CANCEL 37X Speed Dome Camera ⑥ After finishing setting up, press FAR key to exit. Then the cursor will move to “SAVE”.

  • Page 44: System Initialization

    System Initialization SYSTEM INITIALIZE ------------------------ CLEAR ALL DATA CLR DISPLAY SET CLR CAMERA SET CLR MOTION SET CLR EDIT DATA REBOOT CAMERA REBOOT SYSTEM BACK EXIT Factory Default Display Parameters Camera ID PTZ Information Action Title Preset Label Alarm I/O North Direction Privacy Zone Motion Parameters...

  • Page 45: ⑤ Specifications

    White Balance Flickerless SSNR Privacy Zone Stabilization 37X Speed Dome Camera HTSD37X / SIPSD37X Sony 1/4'' Double Density Interline Transfer CCD 811(H)×508(V) 410K 768(H)×494(V) 380K 550 TV Lines(Color), 680 TV Lines(B/W) 50 dB (AGC Off) 37X Optical Zoom, ×12 Digital Zoom F1.6~3.9, f=3.5~129.5mm...
  • Page 46 8 Groups (MAX. 20 Actions with The Combination of Preset, Pattern and Swing) Auto Flip, Auto Parking, Power Up Action and etc. RS-485 (HTSD37X ONLY) Pelco-D, Pelco-P Selectable English, Menu / PTZ information etc 3 Inputs, Photo-Coupler Type, DC 5V~12V 1 Output, Relay Output, MAX.
  • Page 47 Weight [Note] 1) Specification and features are subject to change without prior notice. 2) Check the voltage and current capacity of rated power carefully. HTSD37X : 24VAC ONLY SIPSD37X : 12VDC ONLY 37X Speed Dome Camera MECHANICAL Ceiling Mount...

  • Page 48: Dimensions

    SPECIFICATIONS 5 Dimension Main Body Wall Mount Type 118.6 277.9 [Unit mm] 37X Speed Dome Camera 48/50...

  • Page 49: ⑥ Warranty

    WARRANTY 6 37X Speed Dome Camera 49/50...
  • Page 50 Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. 37X Speed Dome Camera 200 New Hightway Amityville, NY 11701 631-957-8700 www.specotech.com Rev.03082010 Rev.100308 50/50...

This manual is also suitable for:

Sipsd37x

Table of Contents