Quick Operating Keys - Speco HTSD10X Instruction Manual

QUICK OPERATING KEYS

1-64 + preset and 101~200 + preset are used for preset and 65-100 + preset used for functions.
For example, to enter OSD MENU, press the button 95 +PRESET.
<Quick Operation Key Table 1, Pelco - D, P>
Number
1 ~ 64, 100~200 +Preset
65 + Preset
66 +Preset
67 +Preset
71~78 +Preset
81~88 +Preset
91 + Preset
92 + Preset
93 + Preset
94 + Preset
95 + Preset
96 + Preset
97 +Preset
<Quick Operation Keys Table 2> Use these function keys if controller has these keys>
Menu
Tilt Up / Down
Pan Left / Right
Focus Near
Focus Far
Zoom Tele
Zoom Wide
* 65 + preset : Status Report , If user presses any key, it disappears.
Note
PRESET Executing Preset 1 ~ 64
PRESET STATUS Display Preset Status
AUTO SCAN Executing Auto Scan
AUTO FLIP Selectable On/Off/Auto in Auto Flip function
GROUP TOUR Executing Group Tour #1 ~ #8
PATTERN Executing Pattern #1 ~ #8
ZERO POSITION
FREEZE
BLC MODE Selectable On/Off in BLC function
D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)
OSD MAIN MENU To enter OSD Main Menu
FOCUS ADJUST Focus adjusting
ALARM Selectable Enable/Disable all Alarms
Sub menu cursor moves up / down
Enter to the sub menu or status change or decrement
Using for Enter key when user select YES or NO
Using for function changing keys when set coordinate
Status cursor to the right
Status cursor to the left
Function
Function
8