Camera Set - Speco HTSD10X Instruction Manual

OSD MENU SETTING
C. CAMERA SET
C-1.
CAMERA SET - FLICKERLESS
Flickerless feature is selected between 50Hz and 60Hz. The default setting is OFF (NTSC: 60Hz /
PAL: 50Hz). Set flicker mode ON when power source is in discord with frequency. The default
setting is OFF
C-2.
CAMERA SET - MIRROR
This feature creates a mirror image. The default setting is OFF.
C-3.
CAMERA SET – APERTURE
Aperture enhances picture details and sharpness by increasing the gain of the camera and
sharpening the edges in the picture. The default seeting is 10. (the aperture level is from 00 ~ 15)
C-4.
CAMERA SET – D ZOOM
Move the joystick to the right in order to set as ON. The default setting is OFF.
C-5.
CAMERA SET – WB MODE
White balance functions have 4 modes according to the condition of the lighting. The default setting
is AWB and it may change the mode option accoding to the lighting conditions as below.
AWB Mode – 3,200°K to 6, 000°K
Indoor – up to 3,200°K
Outdoor – up to 5,800°K
ATW Mode - 2,000°K to 10, 000°K

CAMERA SET

FLICKER : OFF
MIRROR : OFF
APERTURE : 10
D ZOOM : OFF
WB MODE : AWB MODE
PIC FLIP : OFF
BLC : OFF
D/N MODE : AUTO
DSS MODE : OFF
EXIT
16