5. Remove the six screws securing the front
2-3-2. Replacement of TG-38, DR-68 and CN-242
panel.
Pull the front unit out.
Boards
1. Remove the front unit, referring to Steps l
to 5 in Section 2-3-1. "Replacement of
Front Unit".
2. Remove the four screws and remove the block
shielding cover.
Block Shield Cover
*
Front Unit
6. Install a new front unit by reversing
procedures above.
DXC - 325 (UC)
2-4
DXC - 325P (EK)