Cr_Fanspeed Command; Cr_Slant Command; Cr_Shutrcprot Command; Cr_Shutkeyprot Command - Sanyo PLC-XTC50AL Specifications

PLC-XTC50AL Expand Serial Command Functional Specifications

9.11.14 CR_FANSPEED Command

Command "CR_FANSPEED" [CR]
Details Get selected Fan Control Speed mode.
Acceptable
Response %1
Unacceptable

9.11.15 CR_SLANT Command

Command "CR_SLANT"[CR]
Details Get setting status of Slant setting
Acceptable
Response %1
Unacceptable

9.11.16 CR_SHUTRCPROT Command

Command "CR_SHUTRCPROT" [CR]
Details Get status if Shutter can be controlled by R/C
Acceptable
Response %1
Unacceptable

9.11.17 CR_SHUTKEYPROT Command

Command "CR_SHUTKEYPROT" [CR]
Details Get status if Shutter can be controlled by key on the top panel
Acceptable
Response
Unacceptable

9.11.18 CR_SHUTH Command

Command "CR_SHUTH" [CR]
Details Get time setting to start the shutter management
Acceptable
Response
Unacceptable
"000_%1" [CR]
"MAX" ------------------------ Max mode is selected
"NOR" ------------------------ Normal mode is selected
"?" [CR]
"000_%1"[CR]
"OFF" ------------ Slant is Off
"L1" -------------- L1 mode is selected
"L2" -------------- L2 mode is selected
"L3" -------------- L3 mode is selected
"L4" -------------- L4 mode is selected
"?"[CR]
"000_%1" [CR]
"ON" -------------------- Shutter is not controllable by R/C
"OFF" ------------------- Shutter is controllable by R/C
"Error Code" [CR]
"000_%1" [CR]
"ON" -------- Shutter is not controllable by key on the top panel
%1
"OFF" ------- Shutter is controllable by key on the top panel
"Error Code" [CR]
"000_%1" [CR]
"005" -------------------- 5 minutes
"006" -------------------- 6 minutes
%1 :
"179" -------------------- 179 minutes
"180" -------------------- 180 minutes
"Error Code" [CR]
70/76