[Screen] menu
■ [Corner pattern]
■
Selects the corner pattern mode displayed during
corner correction.
1) Select [Corner pattern], and press the
<ENTER> button.
2) Press ▲▼ to select.
[Red]
Displays the corner pattern in red.
[White]
Displays the corner pattern in white.
[Blue]
Displays the corner pattern in blue.
[Off]
Clears display of corner pattern.
■ [Store]
■
Stores the correction state.
1) Select [Store], and press the <ENTER>
button.
2) Press ▲▼ to select an item, and press
the <ENTER> button.
The adjustment state remains in
[Store]
memory even after removing the
power cord.
The adjustment state is reset when
[Reset]
the power cord is removed.
■
z You can register only one of [Standard] and
[Corner correction].
[Ceiling]
Sets the projection method in accordance with the
installation status of the projector.
If the screen display is upside down, select [On].
■
z This setting is used when the projector is
installed using the ceiling mount bracket (optional
accessory).
1) Press ▲▼ to select [Ceiling].
2) Press the <ENTER> button.
3) Press ▲▼ to select.
[Off]
68 - ENGLISH
[Rear]
Sets the projection method in accordance with the
installation status of the projector.
If the screen display has flipped, select [On].
1) Press ▲▼ to select [Rear].
2) Press the <ENTER> button.
3) Press ▲▼ to select.
[Reset]
The setting returns to its value before adjustment.
1) Press ▲▼ to select [Reset].
2) Press the <ENTER> button.
3) Select [Yes], and press the <ENTER>
button.
■
z The setting returns to its value before
adjustment.
■
z Select [No] and press the <ENTER> button to
return to the sub menu.
[On]
[Off]
[On]