■ To adjust the color
■
1) Press ▲▼ to select the color to adjust.
2) Press the <ENTER> button.
3) Press ▲▼ to change the value, and
press ◀▶ to move between digits.
■
z The numerical values can also be entered using
the number (<0> - <9>) buttons of the remote
control.
Color
x
[Red]
0.000 - 1.000
[Green]
0.000 - 1.000
[Blue]
0.000 - 1.000
[White]
0.000 - 1.000
■ To set the display of test pattern
■
1) Press ▲▼ to select [Auto test pattern].
2) Press the <ENTER> button.
3) Press ▲▼ to switch the setting.
■
z Press the <ENTER> button to end the edit
mode.
[Off]
Clears display of test pattern.
[On]
Displays the test pattern.
■ To reset a value during
■
adjustment
The setting returns to its value before adjustment.
The value returns to the standard value stored in
[Store].
1) Press ▲▼ to select [Reset].
2) Press the <ENTER> button.
■
z A screen for confirming whether to reset is
displayed.
3) Select [Yes], and press the <ENTER>
button.
■ To register adjusted content you
■
have changed
1) Press ▲▼ to select [Store].
2) Press the <ENTER> button.
3) Select [Yes], and press the <ENTER>
■ To return to the sub menu
■
y
0.000 - 1.000
1) Press ▲▼ to select [Back].
0.000 - 1.000
0.000 - 1.000
2) Press the <ENTER> button.
0.000 - 1.000
[Advanced color matching]
More advanced settings than [Color matching] are
possible.
1) Press ▲▼ to select [Color matching].
2) Press the <ENTER> button.
3) Press ▲▼ to select [Advanced color
4) Press the <ENTER> button.
5) Press ▲▼ to select [Advanced color
6) Press ▲▼ to select [On].
[Setting] menu
Registers values after adjustment.
button.
Returns the projector to the sub menu.
■
z Displays [Color matching] setting screen.
matching].
■
z Displays [Advanced color matching] setting
screen.
matching], and press the <ENTER>
button.
■
z When not performing [Advanced color
matching], select [Off]. Items other than [Test
pattern] and [Back] will be grayed out and
cannot be selected.
ENGLISH - 73