Setting Up; Installation Mode; Parts For Ceiling Mount (Optional) - Panasonic PT-EZ770 Series Operating Instructions Manual

Setting up

Installation mode

There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 84) depending on
the installation method.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]

Parts for ceiling mount (optional)

You can install the projector on the ceiling using the optional Ceiling Mount Bracket (Model No.: ET-PKE200H (for High Ceilings), ET-PKE200S
(for Low Ceilings), and ET-PKE200B (Projector Mount Base)).
f Be sure to use the Ceiling Mount Bracket specified for this projector.
f Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with the bracket.
Attention
f To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualified
technician.
Chapter 2 Getting Started — Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[FRONT/CEILING]
Setting on a desk/floor and projecting forward
Method
[REAR/CEILING]
Menu item
[PROJECTION METHOD]
Menu item
[PROJECTION METHOD]
Method
[REAR/FLOOR]
Method
[FRONT/FLOOR]
ENGLISH - 29