Panasonic PT-EX12KU Operating Instructions Manual page 28

Attaching the lens
10) Secure the lens lock lever with the
lens lock lever fixing bracket.
(i) Remove the lens fixing screw and insert it to
the lens lock lever fixing bracket.
Lens lock lever fixing bracket (Type SC-A)
(T0STF0045--)
(ii) Mount the lens lock lever fixing bracket in the
location of the removed screw.
•■Make sure that the lens lock lever fixing
bracket is mounted to keep the lens lock
lever in the lock position. Confirm that the
lens lock lever fixing bracket is mounted
properly shown in the figure.
Attention
■
z In order to fix the attached lens securely, be sure to
mount the supplied lens lock lever fixing bracket.
28 - ENGLISH
Screw
Lens lock lever
Lens lock lever fixing
bracket (Type SC-A)
(T0STF0045--)
Lens lock lever
11) Insert the upper light-shielding plate
along with the guide to into combine
with the lower light-shielding plate.
Upper plate
Lower plate
Attention
■
z When inserting the upper light-shielding plate, the
lower light-shielding plate should be lifted upward.
■
z Make sure that the attaching direction of the light-
shielding plate is correct and set them properly.
■
z If you cannot set the upper light-shielding plate
easily, move the projection screen from the center
to the upper side with the lens shift function in
advance.
12) Slide the lens attachment cover
and fix it with two screws A and two
screws B.
Lens attachment cover